Double wall inside made of thick anodized aluminum/ S. Steel 304 grade and outside Mild steel sheet furnished in durable power coating. The gap of 3” between two walls is fitted with pure white glass wool the door has double viewing to permit observation without disturbing thermal condition. Heating elements are placed in ribs at the bottom and sides. Two adjustable ventilators are placed near the top of the side. Built in horizontal “L” shaped thermometer 0˚ C to 110˚C. The temperature is control Bi-metallic hydraulic capillary thermostat from ambient to 70˚C with sensitivity of ± 1˚C .
TECHNICAL SPECIFICATION INFORMATION:-
| Interior (mm) | 300 X 300 X 300 | 350 X 350 X 350 | 450 X 450 X 450 | 450 X 450 X 605 | 605 X 605 X 605 | 605 X 605 X 900 | 605 X 450 X 900 |
|---|---|---|---|---|---|---|---|
| Capacity (LTR) | 28 | 45 | 95 | 125 | 224 | 336 | 252 |
| Heater load | 400W | 400W | 500W | 700W | 750W | 1.0KW | 1KW |
| Shelves | 2 | 2 | 2 | 2 | 2 | 3 | 3 |
| Temp. Range | Ambient to 70˚C | ||||||
| Temp. Stability | ± 1˚C | ||||||
| MOC (Inner) | Aluminum/Made of Stainless Steel (SS-304) | ||||||
| MOC (Outer) | Made of mild steel sheet duly powder coated. | ||||||
| Safety Device | Over Temperature limiter switch. | ||||||
| Heater | Kanthal A1 super quality coil shaped heater | ||||||
| Typer | Force convection system. | ||||||
| Temp. Controller | Bi-Metallic Hydraulic capillary thermostat controller | ||||||
| Regulator | Solid state electronic relay with protective heat sink | ||||||
| Insulation | Glass wool/Ceramic Blanket | ||||||
| Front door | Glasswool/Mineral wool insulated door with glass window | ||||||
| Power supply | 220/230V A.C single supply; 50Hz | ||||||
| Duty cycle | Continuous | ||||||
