FEATURES:-
- Outer constructed in mild steel with epoxy powder coated.
- Inner surface: inner back wall & side wall made in stainless steel, grade S 304.
- Filter Type: HEPA filter with integral metal guards & frame gaskets.
- Supply of HEPA filter 99.997% at 0.3 micron.
- Primary Filter: Specially designed pre-filter of 0.5 microns to increase the life of HEPA Filter.
- Ergonomic Tilt: Exceptionally comfortable 10 degree. Ergonomic design improves comfort, prevents user fatigue & promotes safe working techniques.
- Manual sliding sash door made up of imported polycarbonate sheet or toughened glass with sloping front for better access of samples.
- Front sash door height can be easily adjusted as per required by end user.
- The transparent sash door maximizes light & visibility inside the cabinet, providing a bright & open working environment.
- The closing/opening of front door is integrated with the UV ON/OFF.
- The UV will automatically switch: OFF when the sash door is opened & switch “ON” when door is closed to avoid accidental exposure of UV light to the operator.
- Air Velocity: 90ft/min ±10.Air Volume: 500 CFM & above
- UV light programming : Available with timer
- Ultra violet tube light: Germicidal i.e. 254 nm
- Electrical socket: Internal socket inside the chamber 5/15 amp.
- Illumination of working surface: Florescent tube light (intensity>600 lux) provides excellent illumination for work surface & reduces operator fatigue. Fluorescent tube light inset behind front control panel.
- LCD Screen Display: Digital Micro processor controlled for operating fluorescent, UV light & blower with audio and visual alarm for HEPA filters life. And also for static pressure measurement of HEPA filter.
- Conveniently located display on outside of the laminar air flow for easy use & also easy to reach.
- Sleep Mode operation: Automatically blower speed reduced upto 30% this will help to save energy as well as help to maintain sterile work area during LAF cabinet is not in operation.
- Intelligence alarm system: Safety purpose audio & visual alarm for air fluctuation and for life of the HEPA filter and UV light.
- Working Noise level: Low/should be <65 dB
- Electrical safety: Electrical component used are standard for better electrical safety for the operator.
- Arm Rest bar: To avoid contamination from outside to inside contamination & for easy working with comfort. Secure & comfortable armrests enhance your comfort during extended work sessions.
- Drainage port: Provide beneath work surface to facilities easy & better cleaning of the interior & handling of spillage inside the chamber
- Blower-Motor Assembly: Dynamically & statistically balanced aluminium centrifugal impeller driven by single phase, 1400 rpm motor double inlet blower fitted in such a way to reduces vibration & noise. Blower is positioned in such a way that to create an even filter loading, it helps stop or long the life of HEPA filters. Provide uniform air flow by adjusting working voltage of fan.
TECHNICAL PARAMETER :-
Model No |
ASI-LAF/422/MBC |
Internal Work Dimension (L x D x H) (mm) |
1200 x 600 x 600(4’x2’x2’) |
No. of HEPA Filter |
1 |
Pre – Filter |
1 |
Motor & Blower |
1 |
No. of Fluorescent Tube |
1 |
No. of UV Tube |
1 |
Cabinet |
Outer (Power Coated)/ PCGI Inner Stainless Steel (SS-304) |
Work Table |
Stainless Steel (SS- 304 grade) |
Main filter |
HEPA filter (99.97 % efficient at 0.3 micro particle) |
Pre-filter |
High efficiency prefilter |
Illumination |
Florescent lamp 40W |
Sterilizing |
UV Germicidal Tube |
Front Door |
Made of plexi glass |
Power Supply |
220-230V AC, 50/60 hz power supply |